Garmin Etrex Button

My Garmin Etrex 30 buttons start to fade away. So to solve it i decided to do some replacement buttons. Anyway, with the holes on the rubber buttons already loosed the waterproofness, so nothing to loose in create the buttons.
Etrex have 3 different sized holes in the carcass. Power and Menu button have one size, while Back button is slightly narrower.
The buttons were designed in fusion 360. Each button have 2 parts, the outside part which will be glued to carcass and an inner part that is the button itself.

Power and Menu files - Botao_OutV1.stl and Botão_IntV1.stl
Back button files - Botao_OutV1_back.stl and Botão_IntV1_back.stl
Up and down button files - BotaoUpDownV1.stl, BotaoDown.stl and BotaoUp.stl

I left the original f3d file, as well as the step and iges files for anyone that need it.


To install the buttons cut the old rubber button. With care, using any sharp cutter, remove also a bit of the rubber around the hole.
Test if the printed inner part slide i