Thingiverse

Garuda Race Canopy

von falconmultirotors

58 Downloads

62 Likes

0 Makes

This is the race canopy for the Garuda 200, 210, and Stretch, a.k.a the Race Thong. The canopy has a mount for HS1177-style FPV cameras at 30°, 45°, and 60°.

#### Supported FPV cameras

* HS1177 / Foxeer XAT600M
* RunCam Swift
* RunCam Owl Plus

This canopy does not fit the Foxeer Arrow, RunCam Swift 2, or RunCam Eagle as they lack the nubs requires to snap into the canopy.

#### Supported lenses

Be sure to select the right file for the lens you'll be using.. **Measure the outer diameter of your lens and select the right file.**

`GarudaRaceCanopy_1.8Lens.stl` - Supports 1.8mm focal length lenses with an outer diameter of 14mm.

#### Required hardware

* 6x M3 black steel hex nut (DIN934, M: 2.4mm, S: 5.5mm)
* 6x M3 8mm black steel button head screw

#### Where to buy

Garuda 210 kits are available at http://falconmultirotors.com/garudastretch.html

Garuda Stretch kits are available at http://falconmultirotors.com/garudastretch.html

Professionally printed

drone garuda 200 garuda stretch garuda 210 HS1177 Quadcopter racing drone runcam owl 2 RunCam Swift drone garuda 200 garuda stretch garuda 210 HS1177 Quadcopter racing drone runcam owl 2 RunCam Swift drone garuda 200 garuda stretch garuda 210 HS1177 Quadcopter racing drone runcam owl 2 RunCam Swift

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Garuda Race Canopy

Ähnliche Modelle

Zur Sammlung hinzufügen