Gashbell

Project: gasbell.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x160.03mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mmFilaments Used: (* = Owned) #080a0d PLA Bambulab Basic Black Transmission Distance: 0.3 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 2 #ff8623 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6.4 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #28 (2.32mm) swap to Blue At layer #30 (2.48mm) swap to Red At layer #33 (2.72mm) swap to Ash Gray At layer #36 (2.96mm) swap to Pumpk