Slicer Discord
GBAHD consolizer HDMI PS4 controller – 3D-printbaar model van Thingiverse Thingiverse

GBAHD consolizer HDMI PS4 controller

door RianB
6 Downloads
12 Likes
0 Makes
Model downloaden
A 3d printed case for the Gameboy advance to hdmi output converter as designed by Zwenergy: https://github.com/zwenergy/gbaHD

Designed around the Gameboy advance motherboard and Seeed Spartan fpga board, in combination with an Arduino uno, usb shield & usb dongle, such that you can play using for example a Playstation 4 controller (instead of using an SNES controller port like most other designs). The device is powered using a 12 V adapter.

The usb shield used in this build is the usb host shield v2.0 (https://github.com/felis/USB_Host_Shield_2.0) with the corresponding software library. Make sure not to forget to solder the correct bridges on the shield before using it, as otherwise the shield will not be powered correctly! You can then either use the shield together with a generic bluetooth dongle (I used this one: https://www.amazon.nl/TP-Link-UB400-Bluetooth-Computer-Ondersteunt/dp/B07NQ5YGDW/ref=asc_df_B07NQ5YGDW/?tag=nlshogostdde-21&linkCode=df0&hvadid=430509123063&hvpos=&
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, TPU
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie