GC Turbo

a passion project for a modular gamecube console, customizable in nearly every way!

Any Major Updates On Github @ https://github.com/GCTurbo/GameCube-Turbo

for this project you'll need:

- A working gamecube dol-101 motherboard (with SP1 & SP2 REMOVED), working fan AND controller port pcb
- A Soldering setup (preferably one that also has a heat gun attatchment; electric solder sucker HIGHLY RECOMMENDED FOR PORT REMOVAL.)
- Both Momentary & Latching 19mm Ring Led Buttons (Arcade styles) [Listed Below]
- Gamecube dol-001 lid jewel or acrylic disk (listed below)
- M2, M3, M4 size screws mostly 6-10mm along with matching metal threaded heat inserts otherwise you'll have broken plastic. (Both listed below)
- (4) Main screws in the bottom are 30-35mm M3 screws, there are (4) M3 nuts that need to be placed internally while the "Top half" is printing, without those nuts you will have nothing to tighten into.
- mag lid uses (8) 5x2.8mm magnets to keep it closed and shut.
- PLA+
- Extra Long