Thingiverse
gCreate Rocket Ship Flickering Flame Mod
von Jon_S
122
Downloads
102
Likes
1
Makes
This is a mod of the gCreate rocket ship that adds a flickering LED in the rocket plume.
I added a thin tube so that thin wire could be fed though and a hole in the bottom where I inserted the guts from a 34mm diameter (this was the diameter of the base after the top was removed) flickering LED tea light that I bought from a Dollar Store.
I cut off the LED and re-soldered it at the tip of the smoke, and glued the flame over the top of it.
I also modified the flame so there was space for the LED and made it fit in to the engine nozzle on the rocket better than in the original.
Both parts are scaled to 59% of the original size to fit the bed of my Printrbot Jr.
For more details, please refer to the instructions.
http://youtu.be/Yq1u0m0Ch2I
I added a thin tube so that thin wire could be fed though and a hole in the bottom where I inserted the guts from a 34mm diameter (this was the diameter of the base after the top was removed) flickering LED tea light that I bought from a Dollar Store.
I cut off the LED and re-soldered it at the tip of the smoke, and glued the flame over the top of it.
I also modified the flame so there was space for the LED and made it fit in to the engine nozzle on the rocket better than in the original.
Both parts are scaled to 59% of the original size to fit the bed of my Printrbot Jr.
For more details, please refer to the instructions.
http://youtu.be/Yq1u0m0Ch2I
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
