Gear Ball Joint

==========================================================2023.12.02直径36_16齿的齿轮球关节,本来还想做四个球的...好像有点麻烦,算了.打印部分:打印件底部区分圆底和平底,平底更好打印圆底不低于50%密度,不要用树形支撑,顶底图案同心圆你可以打印两个圆底,两个平底或者一个圆一个平齿轮球各半个,用胶水粘合齿球和球碗间隙的测试0.4不容易齿轮卡死,但是没法放布料上画8字,很涩.0.45间距不容易卡,但卡了动不了,得用力向两边掰开转动.0.5很顺滑.很容易卡,但容易掰回来.综合体验我提供了0.4和0.45的版本,至于这两参数之间的我没有打印测试.FDM打印偏差的因素很多,就不0.01的改参数抠精度了.需配件:M3x10螺丝2个 A gear ball joint with a diameter of 36_16 teeth, I originally wanted to make four balls… It seems a bit troublesome, forget it.Printing part: The bottom of the print is distinguished by round bottom and flat bottom, flat bottom is easier to print Round bottom not less than 50% density, do not use tree-like support, top and bottom pattern concentric circles You can print two round bottoms, two flat bottoms or one round and one flat Half of each gear ball, glue them togetherTest of the gap between the gear ball and the ball bowl 0.4 is not easy to jam the gear, but it can’t put cloth on it to draw an eight, it’s very astringent. 0.45 gap is