GearBox v3 -Modular

This is a modular gearbox meaning if you need more speed you can print another one and easily put them together.
The modules each have 2 gears with a 1:5 ratio.
The gears themselves are very strong and can handle a lot of force.
A complete module takes about 6 hours to print which is not a large amount of printing time so it is easy and fast to make a lot of them however this is completely dependent on your printer as well as your settings.
Also if your wish you can scale up or down all the parts and it will work just fine.
I found this size to be easiest and fastest to print with a lot of strength.
{video: https://youtu.be/tdeh0zueUj0 }

PARTS PER MODULE:
1x S_Gear
1x L_Gear
1x B_Case
1x T_Case
2x Shaft
The Shaft_NoCap is only if you don't want the output to be round ( have the cap ).

PARTS PER 2 MODULES:
2x S_Gear
2x L_Gear
2x B_Case
2x T_Case
3x Shaft
The Shaft_NoCap is only if you don't want the output to be round ( have the cap ).

MODULAR ASSEMBLY:

Eve