Geared Desk Clock

A neat looking 3d printed gear clock for your desk!

You'll need to print:
* 6x spacers
* 3x 10 tooth gears
* 2x 20 tooth gears
* 2x 18 tooth gears
* 2x 12 tooth gears
* 1x 15 tooth gear
* 2x foot
* 1x 36 tooth "minute hand" gear
* 1x 32 tooth "hour hand" gear
* 1x 12 tooth motor gear
* 1x motor mount
* 1x plate

Additionally:
* 12x nylon washers
* 8x m4 20mm bolts
* 8x m4 nuts
* 6x m4 13mm standoffs round
* 1x stepper motor (I recommend model 28BYJ-48)
* 1x stepper motor driving board
* (Optional) 1x small magnet
* (Optional) 1x reed switch
* glue (Super glue works, but I recommend a solvent based glue like "Weld-On 16")

Tools:
* Screw Driver
* Pliers
* Small File

Assembly:
1. Print all the parts.
1. Glue together gear sets as specified in ascii_gearsets.txt
* Note! Don't glue to the metal standoff or to the nylon washer.
1. Attach the motor using the motormount and its corresponding 12 tooth gear.
* Note! Put a nylon washer between the gear