Thingiverse
Geared Fan Cover
par Dunn3DP
1
Téléchargements
2
Likes
0
Makes
Here is a cover and base for the geared fan by that1guyuknow. I liked the fan and thought it needed cover so here is one for it. It also has a modified gear cover to fill in the extra gap with the cover over the handle gear.
Change rotations and add support where needed, should be an easy print.
It is pretty large so you may have to print this at 90% scale and also print the geared fan at 90% for everything to fit. If you have a larger bed then 220mm X 220mm X 300mm you should be able to do this at 100% scale.
My brother did the design I'm just sharing the work, all credits go to him for this.
Change rotations and add support where needed, should be an easy print.
It is pretty large so you may have to print this at 90% scale and also print the geared fan at 90% for everything to fit. If you have a larger bed then 220mm X 220mm X 300mm you should be able to do this at 100% scale.
My brother did the design I'm just sharing the work, all credits go to him for this.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !