Thingiverse
Geeetech 2in1 mount Hero Me compatible
by Spydyr
30
Downloads
14
Likes
0
Makes
This mount is designed to work with the Hero Me Gen 5 system. This is the Gantry Plate and Hotend mount only. There is also 1 beefed up fan duct in this collection.
You must get ABL and Fan ducts from https://www.thingiverse.com/thing:4460970 I do not include any of that. He has a very good write up about the whole system. There is no need for me to repeat what he has done. There are a few changes that are listed here.
Do to the positioning of the hotend on Geeetech A10M and A20M the Gantry Plate has ABL on the right side instead of the left side. This is to prevent hitting the X axis cover with the ABL portion of the gantry mount. However there is a Left ABL mounting option included for sensorless homing option. If you use the Right Gantry mount make sure to mirror the correct ABL Wings and Sliders or they will be backwards.
All Hotend Bases use 30mm fans at this point. I will be adding 40mm fans after I get some fans and test.
BTT Mix Base Gen5 Standard is 100% compatible
You must get ABL and Fan ducts from https://www.thingiverse.com/thing:4460970 I do not include any of that. He has a very good write up about the whole system. There is no need for me to repeat what he has done. There are a few changes that are listed here.
Do to the positioning of the hotend on Geeetech A10M and A20M the Gantry Plate has ABL on the right side instead of the left side. This is to prevent hitting the X axis cover with the ABL portion of the gantry mount. However there is a Left ABL mounting option included for sensorless homing option. If you use the Right Gantry mount make sure to mirror the correct ABL Wings and Sliders or they will be backwards.
All Hotend Bases use 30mm fans at this point. I will be adding 40mm fans after I get some fans and test.
BTT Mix Base Gen5 Standard is 100% compatible
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!