Thingiverse
Geeetech 8mm extruder mount top
von BuiltBrokenGlued
3
Downloads
0
Likes
0
Makes
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/c1oSHMiHUgj
designed so i could easily move my cheap metal extruder assembly somewhere on the printer.
This is a revised design from my first print that im using. This has not yet been tested.
The revised design here is flush with the top and also has the recess deeper for the vertical acrylic mount section.
It is secured using the top plate single screw. I did have to use a M3 screw 5mm longer than the one i Geeetech recommended
designed so i could easily move my cheap metal extruder assembly somewhere on the printer.
This is a revised design from my first print that im using. This has not yet been tested.
The revised design here is flush with the top and also has the recess deeper for the vertical acrylic mount section.
It is secured using the top plate single screw. I did have to use a M3 screw 5mm longer than the one i Geeetech recommended
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!