Geeetech A10 - Case for 5inch Waveshare DSI Touchscreen

This requires the original A10 metall display holder. I also uploaded an additional Left Side Holder for a Raspberry Pi: https://www.thingiverse.com/thing:6156490

I made this for the 5inch Waveshare DSI Touchscreen to be connected via 15 pin ribbon cable to a Raspberry Pi. HDMI Screens won't fit! You can find the measurements here: https://www.waveshare.com/img/devkit/LCD/5inch-DSI-LCD/Exterior-Size.jpg Maybe other 5inch DSI Touchscreens wil fit too.

Important: There are 2 STLs for the Baseplate:
"Baseplate.STL" is made for Heat Set Inserts which I recommend
"Baseplate_without_inserts.STL" uses smaller holes so you can screw directly into the plastic, without inserts.

Additional parts needed:
2x M4x10 socket head bolt
2x M4 washer
4 x M3x6 socket head bolt
4x M3 washer
4x M3x8 countersunk bolt
4x M2,5x5 (comes with Waveshare Screen)
4x M3x4x5 Heat Set Inserts (optional)