Thingiverse
Geeetech I3 Acrylic led light switch
by toodark
13
Downloads
14
Likes
0
Makes
Parts to mount a led strip onto the Geeetech i3 pro acrylic frame.
The switch plate should be mounted onto the main control frame and it replaces one of the spacers. It houses a standard 2 way switch with a 6mm hole.
The connectors are optional, I've used them to mount the light strip without glueing to the frame. I used a 4mm wide 120 leds/m 12V natural white led strip from the local store. The strip is connected to the PSU, and turned on/off with the switch.
The switch plate should be mounted onto the main control frame and it replaces one of the spacers. It houses a standard 2 way switch with a 6mm hole.
The connectors are optional, I've used them to mount the light strip without glueing to the frame. I used a 4mm wide 120 leds/m 12V natural white led strip from the local store. The strip is connected to the PSU, and turned on/off with the switch.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
