Thingiverse
GeekPi 7inch LCD Touchscreen Mount
par Top_Goodman
3
Téléchargements
1
Likes
0
Makes
Designed this case\mount for use with the Creality 10S (should work with other creality 10 series that use the standalone control box). For use with GeekPi LCD Touchscreen I got on Amazon (price has sadly increased on this screen, yet it is a good one) https://www.amazon.com/dp/B075QCXLPF
If you are printing the back_mount I highly advise to print with the larger screen side facing down. This will require using supports for the indent that the monitor will sit in. Yet for me, this came out very easily.
There is an included test print for the angle that the case mount is positioned to, alternatively that can be used as a door stop when done.
Also included a back "plate" that can be used with the monitor without needing to attatch it to a printer control box.
The holes are smaller than needed. This is to ensure a snug fit. Since the print is thin enough it acts like it is tapped. I used either 2.5M or 3M bolt, Sorry I I forgot which one. Please check that you are not damage the
If you are printing the back_mount I highly advise to print with the larger screen side facing down. This will require using supports for the indent that the monitor will sit in. Yet for me, this came out very easily.
There is an included test print for the angle that the case mount is positioned to, alternatively that can be used as a door stop when done.
Also included a back "plate" that can be used with the monitor without needing to attatch it to a printer control box.
The holes are smaller than needed. This is to ensure a snug fit. Since the print is thin enough it acts like it is tapped. I used either 2.5M or 3M bolt, Sorry I I forgot which one. Please check that you are not damage the
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !