Geisha

Project: geisha.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 155.17x230mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 1.5 PLA+ Esun Beige Transmission Distance: 4 PLA BambuLab Matte Scarlet Red Transmission Distance: 2.1 Swap Instructions: Start with White At layer #8 (0.72mm) swap to Black At layer #10 (0.88mm) swap to Beige At layer #15 (1.28mm) swap to Black At layer #20 (1.68mm) swap to Jade White At layer #21 (1.76mm) swap to Black At layer #22 (1.84mm) swap to Scarlet Red for the rest.