Thingiverse
Gelatin beaker support
von roy_blade
7
Downloads
9
Likes
0
Makes
I designed and printed this support at the request of a friend who wanted a rack to display 18 large "plastic test tubes" filled with eatable gelatin to be part of a children's party table decor. The final result was great and it was great fun for the kids.
These files include everything you need for the support, but the test tubes are not included (we bought them on the local market but I guess they are like this one: http://a.co/5AekGUA ).
Because the larger lower disk is too big, I divided it into two halves that need to be glued together. The two halves are identical, so you just need to print such file twice. Once you insert the large disk through the top cylinder, I suggest you also glue them together. The small disk on the top doesn't have to be glued to the cylinder, but if you choose to do so, please remember to do it after you've inserted the large disk.
I used rafts and full supports to print all parts except for the small disk.
This is one of my first designs ma
These files include everything you need for the support, but the test tubes are not included (we bought them on the local market but I guess they are like this one: http://a.co/5AekGUA ).
Because the larger lower disk is too big, I divided it into two halves that need to be glued together. The two halves are identical, so you just need to print such file twice. Once you insert the large disk through the top cylinder, I suggest you also glue them together. The small disk on the top doesn't have to be glued to the cylinder, but if you choose to do so, please remember to do it after you've inserted the large disk.
I used rafts and full supports to print all parts except for the small disk.
This is one of my first designs ma
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
