Gemini handlebar computer mount

Computer mount to replace the Gemini handlebar top cap. This was used on an Aliexpress knock-off, but dimensions should not differ.

It requires an O-ring to secure it to the fork steerer (friction fit), a computer mount adapter
, and 2 bolts to attach the adapter to the holder. I used some small course thread (to thread into plastic) phillips screws I has lying around, but countersunk screws should work better.

It is valid for Bryton Garmin and Wahoo mount types, but the 3D model (included) should be modified tor the two latter ones to rotate the screw holes 90 degrees.

It has an interior pocket which I use to store tyre plugs and chain links.

I used only build plate supports and printed it in ABS lighter final part compared to PLA

Here is a link (non monetised) to the adapter I used:
https://es.aliexpress.com/item/32918431914.html?spm=a2g0o.productlist.0.0.2a623b88Oxe0V0&algo_pvid=dbc4d23a-3402-44e0-bf75-d5b88de4c016&algo_expid=dbc4d23a-3402-44e0-bf75-d5b88de4c016-3&