Thingiverse
Electronics
Model downloaden
GEMMA M0 Case
88
Downloads
72
Likes
0
Makes
3D Printed Case for GEMMA M0
If you're working on a project using the Adafruit GEMMA M0, you may want a case to protect it. This simple two piece enclosure can house the PCB and a 150mAh lithium ion polymer battery.
Portable GEMMA M0
The PCB is secured to two standoffs with M2.5 (6mm long) screws. We have a nice assortment of M2.5 sized nylon screws and nuts that will work well. The case allows access to the microUSB port for powering and programming. A slide switch extension allows you to power the GEMMA M0 on and off. To keep the case (relatively) slim, an opening on the cover lets the JST connector poke through the top.
https://learn.adafruit.com/gemma-m0-case/overview
If you're working on a project using the Adafruit GEMMA M0, you may want a case to protect it. This simple two piece enclosure can house the PCB and a 150mAh lithium ion polymer battery.
Portable GEMMA M0
The PCB is secured to two standoffs with M2.5 (6mm long) screws. We have a nice assortment of M2.5 sized nylon screws and nuts that will work well. The case allows access to the microUSB port for powering and programming. A slide switch extension allows you to power the GEMMA M0 on and off. To keep the case (relatively) slim, an opening on the cover lets the JST connector poke through the top.
https://learn.adafruit.com/gemma-m0-case/overview
adafruit publiceert ook op
1 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
