General Class Band Plan

My version of a General Band Plan, sized to be used with a 4x6 magnet sheet. Designed in InkScape and HueForge. Project: General Class Band Plan.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 152.4x101.6mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyTerra Cotton White Transmission Distance: 2.5This print uses 3 unique filamentsSwap Instructions: Start with Charcoal Black At layer #6 (0.56mm) swap to Sapphire Blue At layer #10 (0.88mm) swap to Cotton White for the rest.