Thingiverse
General motorcycle blinker adapter
by rossux
51
Downloads
32
Likes
0
Makes
This is an adapter for the motorcycle blinker.
On some motorcycles (like mine Triumph) the blinker are mounted with M6 screw and an additional hole for the cables. Most of the aftermarket blinker comes with a M8 screw and cables pass trough the screw.
With this adapter you can mount M8 threaded blinker on a M6 threaded motorcycle.
I've not road tested the adapter, try at your own risk. I suggest to print it with high resistance material (such as ABS) with 100% infill.
For Triumph Tiger 1050 sport dedicated blinker holder, take a look on http://www.thingiverse.com/thing:1816236
As prescribed from GPL license, I include the "source" freeCAD file and a copy of the license.
On some motorcycles (like mine Triumph) the blinker are mounted with M6 screw and an additional hole for the cables. Most of the aftermarket blinker comes with a M8 screw and cables pass trough the screw.
With this adapter you can mount M8 threaded blinker on a M6 threaded motorcycle.
I've not road tested the adapter, try at your own risk. I suggest to print it with high resistance material (such as ABS) with 100% infill.
For Triumph Tiger 1050 sport dedicated blinker holder, take a look on http://www.thingiverse.com/thing:1816236
As prescribed from GPL license, I include the "source" freeCAD file and a copy of the license.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!