[GENERATOR] Electrical box for insulation ⌀60

Hey! If you are looking for a generator of Electrical box for insulation ⌀60 you can find it here. Some basic info: The electrical box consists of an upper and lower part — you need to generate and print both. If you are going to print it, do not use PLA rather PETG or other materials. Rather recommended V0 type :) The threaded part is 40mm long. The minimum height of the base is 20mm (do not go below this length). The screw hole spacing is 60mm (standard electrical box). However, you can adjust these values at your own risk :) Top non-screw part height is 15mm You can also decrease or increase the thickness of the wall-mounted plate. The default thread clearance is -0.15mm. If you have trouble screwing it in, increase the clearance.