Generic calibration tower

This a generic calibration tower for fast printing with round pillar. Print @ 0.2, including first layer, 0% infill, 3 walls thick, 3 bottom layers and 0 top layer

9 sections to print with multiple process. Between each section, 0.6mm smaller round with a 0.2mm overhang, so with a 0.4 nozzle, really no problem. If you print @ 0.2, including first layer, here's the height of sections:

In layer:
Section 1 (including base): 1
Section 2 start at: Layer 29
Section 3 start at: Layer 57
Section 4 start at: Layer 85
Section 5 start at: Layer 113
Section 6 start at: Layer 141
Section 7 start at: Layer 169
Section 8 start at: Layer 197
Section 9 start at: Layer 225

In MM

Section 1 (including base): 0
Section 2 start at: 5.8
Section 3 start at: 11.4
Section 4 start at: 17.0
Section 5 start at: 22.6
Section 6 start at: 28.2
Section 7 start at: 33.8
Section 8 start at: 39.4
Section 9 start at: 45.0