Generic Windicator Transmitter Mount

I liked the windicator by chewbaccah (#887932), but it wouldn't fit on my dx9, so I have designed up my own. It is designed to use a cut down driveway marker like you would find at lowes- the ones at lowes are rougly 7.75mm in diameter (https://www.lowes.com/pd/Hillman-48-in-x-0-375-in-Staff-Sign/3025196). There are 2 designs- one for 3mm screws (pre threaded) and a second one that takes threaded inserts for 3mm screws. I printed them up in pla with 30% infill. This is designed with a flat back to attach to the transmitter with 3m double sided tape.

so first printing the inner hole was too tight, I have increased its diameter to 8.2mm.

made one more tweak- made a second set where I widened the base out so that it would have more area to attach to the transmitter.

4/23/18- added a clip to keep the streamer wrapped around the shaft when storing the streamer.- this was based upon the clip for the universal parametric spool holder by rowokii (https://www.thingiverse.com/thing:76