Gengar Evolution Fridge Magnets

UPDATE (12/10): Added an extra white layer to the face-down version of Gastly, to minimise colour bleed. Also added a print profile which minimises waste when printing a set of all three, by changing the back of Gastly to black. UPDATE (11/10): Added a face-down version which should print nicer on an AMS, however it is currently untested. Fridge magnets (using two 6x2mm magnets) of the original Genngar evolutionary line. Can either be printed using manual layers swaps (see below) or an AMS. Included are print files for both options. The models in the cover picture were made using manual swaps. Manual layer swaps (assuming 0.12mm layers/included in print profiles): Haunter and Gengar Start: Black From layer 33: Purple From layer 36: White From Layer 38: Red Gastly Start: Black From layer 30: Purple From layer 33: Black From layer 36: White From Layer 38: Red Recommended print settings (original print files already have these settings): First layer height: 0.24mm Other layer height: 0.12