Gengar Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.48x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mmThis print uses 5 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Purple At layer #19 (1.6mm) swap to Lavender Purple At layer #22 (1.84mm) swap to Red At layer #26 (2.16mm) swap to White for the rest.Boost MeLike, Rate and Boost me!