Gengar Pokemon Hueforge

This is a Gengar Pokémon fan art HueForge wall piece, designed for bold contrast and strong visual impact. The layered purple smoke elements give real depth, making the print feel alive once it’s on the wall. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.48mm #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #ffffff PLA Sunlu White 2.0 Transmission Distance: 2.7 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to White 2.0 At layer #18 (1.52mm) swap to Indigo Purple At layer #25 (2.08mm) swap to White 2.0 At layer #27 (2.24mm) swap to Indigo Purple for the rest. Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changi