Genmitsu 3018 Pro E-Stop Mount

Genmitsu 3018 Pro E-Stop Mount

Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If you look under my postings you'll see others including the Cable Chain, X,Y & Z Limit Switches, Vacuum Adapter, Cushion Feet, Clamping Set, E-Stop Mount and more.

An E-Stop is a very useful piece to add - especially when your first starting out with CNC. It allows you to quickly halt the process when things don't go as planned.

For this you will need to purchase the E-Stop button which you can find on Amazon as item number B0834SV7F9. You will also need a 1/4-20 x 1/2" bolt and nut from your local hardware store.

Important Note: The E-Stop you purchase off Amazon is NOT wired correctly for the 3018 Pro. To make it work you need to move one wire. The wires going into the switch are on terminals labelled "C" and "NC". Move the wire (requires resoldering)