Slicer Discord
Geocache box – 3D-Druckmodell von Thingiverse Thingiverse

Geocache box

von eirikso
601 Downloads
376 Likes
5 Makes
Zum Modell
Remix of the very nice match case. Designed to be used with any standard bottle cap. I'm printing these in ABS with 100% infill. With a proper bottle cap these are completely water proof.

I remixed it with a place to mount two magnets. So that this can be used as a geocache box that can be fixed to any magnetic surface.

You find my version with and without text. The text reads: "geocaching.com - Please, do not remove"

I have also made a small "log holder" to make it easier to insert and remove the log. The solid log holder should be printet with Cura's "no solid infill top and no solid infill bottom (unchecked) and "Spiralize outer contour" checked.

Suggested magnets:
http://www.banggood.com/20pcs-N52-Super-Strong-Round-Magnets-10mm-x-4mm-Rare-Earth-Neodymium-Magnets-p-998141.html

Or any strong round magnet that is 10 mm diameter and approx 4 mm thick.

Secure magnets with silicone, sugru, Tek7 or something similar. A glue that can survive the wear and tear of weather
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
keine Supports · aufwändige Nachbearbeitung
Ohne Supports Einteilig Hardware nötig
Supports 0/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, ABS, Polycarbonate
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

eirikso veröffentlicht auch auf

5 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen