Engineering
Voir le modèle
Geodesic Icosahedron
16
Téléchargements
16
Likes
0
Makes
Last week I watched a video that demonstrated how to design an icosahedron in Fusion 360. This gentleman's technique was so simple and he presented it so well. I had to try it myself.
https://www.youtube.com/watch?v=urd1lW8_fLI
Then I used his techniques to create the components to make this little geodesic sphere.
This was my first attempt to design and print one of these. My hope is to used what I learned here and build a 2v geodesic dome.
A skirt adhesion was used when printing the vertices.
The edges were difficult to keep in place while printing but I did not want to use full adhesion. So I made my own and it worked great.
(12) Vertices
(40) Edges
Please let me know what you think.
https://www.youtube.com/watch?v=urd1lW8_fLI
Then I used his techniques to create the components to make this little geodesic sphere.
This was my first attempt to design and print one of these. My hope is to used what I learned here and build a 2v geodesic dome.
A skirt adhesion was used when printing the vertices.
The edges were difficult to keep in place while printing but I did not want to use full adhesion. So I made my own and it worked great.
(12) Vertices
(40) Edges
Please let me know what you think.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !