Thingiverse
Geometric Wrist Rest
von Ironbeagle4222
9
Downloads
5
Likes
0
Makes
Was inspired by this Reddit post:
https://www.reddit.com/r/MechanicalKeyboards/comments/md33xz/licit_60_mk2_chassis/
Quickly threw this together as I was learning Fusion360. There are two versions of the base. One has an RGB passthrough for the IDOBAO IDv2 and the other one does not for non-RGB boards. There is also available rubber bump-on divets on the bottom and the insert is removable so you can customize your own in CAD. Lastly, you will have to get your own piece of 1/8 inch or 3 mm thick acrylic/plexiglass to finish it off. Have fun printing!
https://www.reddit.com/r/MechanicalKeyboards/comments/md33xz/licit_60_mk2_chassis/
Quickly threw this together as I was learning Fusion360. There are two versions of the base. One has an RGB passthrough for the IDOBAO IDv2 and the other one does not for non-RGB boards. There is also available rubber bump-on divets on the bottom and the insert is removable so you can customize your own in CAD. Lastly, you will have to get your own piece of 1/8 inch or 3 mm thick acrylic/plexiglass to finish it off. Have fun printing!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
