german shepherd hueforge

Project: german shepherd stl.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Yellow At layer #5 (0.48mm) swap to Black At layer #7 (0.64mm) swap to Brown At layer #8 (0.72mm) swap to White for the rest.