Thingiverse
German WW2 tanks
von ChristianSides
0
Downloads
1
Likes
0
Makes
these have snap turrets, so if the turrets don't fit, just carve out a little bit of the hole on the chassis.
some cleanup may be required for the bottoms of the turrets so they will fit.
the scale is 1/200.
print with supports, (It is necessary to remove the supports I placed under some barrels) and I also added a "False Barrel" to some tank destroyers and self-propelled artillery pieces (they are where the barrel gets a little bit thinner) so that the supports would work, and these will need to be cut off.
print at 10-15% infill and 2-3 layers.
some cleanup may be required for the bottoms of the turrets so they will fit.
the scale is 1/200.
print with supports, (It is necessary to remove the supports I placed under some barrels) and I also added a "False Barrel" to some tank destroyers and self-propelled artillery pieces (they are where the barrel gets a little bit thinner) so that the supports would work, and these will need to be cut off.
print at 10-15% infill and 2-3 layers.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!