Thingiverse
Ghost Costume
por pefozzy
8
Descargas
3
Likes
0
Makes
Variation on the popular "sheet over the head ghost costume". These models are for see-through ghost eyes and mouth. These are intended to be sewn onto the sheet to provide more decorative ghost eyes and mouth than simple holes in the sheet. A multitude of sewing holes are provided around the perimeter of each part.
A eye variation is included that has mounts for 5mm diameter LEDs to give the evil red eye appearance. Enjoy!
For the red eyes, I used parts all from the junk box -cheap 5mm red LEDs wired in parallel with some soft 30g silicone stranded wire, a small resistor to keep the current in check, and a small 300mAh 3.7v LIPO. This battery is very small and light, and provided plenty of energy to keep the LEDs illuminated during an evening of trick-or-treating. We sewed the wire and battery to the inside of the ghost costume to keep it out of the way of our little ghost. The small gauge silicone stranded wire was nice as it was very flexible and could move with the costume.
A eye variation is included that has mounts for 5mm diameter LEDs to give the evil red eye appearance. Enjoy!
For the red eyes, I used parts all from the junk box -cheap 5mm red LEDs wired in parallel with some soft 30g silicone stranded wire, a small resistor to keep the current in check, and a small 300mAh 3.7v LIPO. This battery is very small and light, and provided plenty of energy to keep the LEDs illuminated during an evening of trick-or-treating. We sewed the wire and battery to the inside of the ghost costume to keep it out of the way of our little ghost. The small gauge silicone stranded wire was nice as it was very flexible and could move with the costume.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
