Ghost Flag USA Hueforge

Another patriotic photo I decided to Hueforge. This is “Ghost” operator with the American flag flying off his back. This can be printed with a single AMS unit. Assign the black and white to the same AMS slot and swap the white in after the black baselayer finishes. (~1 hour) This is a 2 plate print with a total size of 200x400. Find the frame here: https://makerworld.com/en/models/618484-hueforge-displate-400x200-connected-frame?from=search#profileId-542281 Enjoy and please drop a like or comment if you enjoy this print! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x400mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite White Transmission D