Ghost R1 power button bracket

Here's a 3D printable power button bracket for Louqe Ghost R1, since some of the buttons at least for this first batch are not aligned properly.
This model allows you to adjust the placement of the button both horizontally and vertically.

The model is a bit shorter than the original bracket, so vertical alignment might get fixed just by printing it. For most users I'd recommend a starting point of:
-0.5 mm horizontal offset, 0 mm vertical offset.

Steps for editing the parameters in Autodesk Fusion:
1. Open the project file (.f3d) in Fusion.
2. From the top ribbon select: Modify -> Change Parameters
3. Set desired values for HorizontalOffset and VerticalOffset. (Click and type into the field in the "Expression" column.)
Negative values move the button to the left/down. Positive values move it to the right/up.
You can also modify TolerancePCBScrews and ToleranceBottomScrews if you find the threads to be too tight or loose.
6. Click OK to close the window. Save the project, if