Ghost Rider Hueforge

IF YOU LIKE IT, LEAVE ME A BOOST LIKE AND A COMMENT WITH THE PHOTO OF THE PRINT, IT WOULD HELP ME A LOT TO KNOW IF YOU LIKE IT... It can be printed with any 3D printer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 162.25x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.3 PLA Smart Recycled Blue Gray Transmission Distance: 3 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Orange Transmission Distance: 5.7 PLA Smart Recycled Yellow Bird Transmission Distance: 4 PLA Smart Recycled White Transmission Distance: 5.7 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #11 (0.96mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #19 (1.6mm) swap to Yellow Bird At layer #20 (1.68mm) swap to White for the rest.