Ghost Rider Hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.25mmThe Model is 146.71x223mm in sizeYou may print at higher layer heights below the Min Depth of 0.25mmThe Max Depth is 2.5mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions