Ghost Ship

Project: Pirate shipPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Turquoise Transmission Distance: 5 PLA BambuLab Glow Neon Green Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Turquoise At layer #18 (1.52mm) swap to Neon Green for the rest.