Ghostbusters Drawing

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.51x170mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #757575 PLA Bambu Nardo Gray Transmission Distance: 1.5 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Nardo Gray At layer #13 (1.12mm) swap to Gray At layer #18 (1.52mm) swap to Jade White At layer #31 (2.56mm) swap to Black for the rest.