Thingiverse
GHOSTBUSTERS - - - Slimer (Large scale)
152
Downloads
145
Likes
1
Makes
Upscaled Geoffro's most awesome slimer model.
This was cut down to max out the DS5 build plate potential and nearly 1:2 scale. Of course you will need to rescale all parts to suit your own needs.
If you find any bugs just let me know. It may be a while before i attempt this build myself.
Main model mesh has 90% polygon reduction (70 to 7Mb)
Print settings:
supports required. set to 90 degrees or less as required.
Layer height as of your choice.
3 to 4 layer wall thickness (1.6mm)
5% infill
Updates:
Head from 1.1 to 1.2. Made good boundary edges and installed higher resolution eyes.
This was cut down to max out the DS5 build plate potential and nearly 1:2 scale. Of course you will need to rescale all parts to suit your own needs.
If you find any bugs just let me know. It may be a while before i attempt this build myself.
Main model mesh has 90% polygon reduction (70 to 7Mb)
Print settings:
supports required. set to 90 degrees or less as required.
Layer height as of your choice.
3 to 4 layer wall thickness (1.6mm)
5% infill
Updates:
Head from 1.1 to 1.2. Made good boundary edges and installed higher resolution eyes.
dazzadazzadazzadazza also publishes on
3 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!