GhostFace Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.52x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.5mmThe Max Depth is 3.3mm and the Actual Depth is 3.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5.3 PLA BambuLab Basic Blue Gray Transmission Distance: 4.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #21 (1.76mm) swap to Orange At layer #26 (2.16mm) swap to Blue Gray At layer #29 (2.4mm) swap to White for the rest.