Girl bookmars

In the print project, the negative part is inserted. If you dont want a hole in the bookmark, remove it before the print. Model size is 50x150mm and 65x200mm. When changing dimensions, you must not change the height (Z). Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  You may print at higher layer heights below the Min Depth of 0.4mm  The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 4.8 PLA Elegoo + White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #10 (0.88mm) swap to Orange At layer #11 (0.96mm) swap to White for the rest.