Girl face V.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x200mm in size. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.08mm and the Actual Depth is 2.08mm.   Filaments Used: PLA Anycubic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Elegoo + White Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Charcoal Black At layer #11 (0.96mm) swap to Blue Gray At layer #14 (1.2mm) swap to White for the rest.