Slicer Discord
GKTWO DRIP ADAPTOR (Updated) – 3D printable model from MakerWorld MakerWorld
3D Printer Accessories

GKTWO DRIP ADAPTOR (Updated)

60 Downloads
17 Likes
39 Makes
Go to Model
This part allows you to set the build plate of your GKtwo upright so that excess resin drips off your models.This then puts less liquid resin in your cleaning solution which keeps it cleaner longer.The lid of the GKtwo can still be closed when this part is in place.Here's a video explaining why I designed it.https://youtube.com/shorts/HBtRUPURH5Q?feature=share3Please NoteThis part was designed to be used when the build plate arm is at its highest position. Meaning, the position that the build plate raises to once a print is finished.Make sure the Drip Adapter is set against the lip of the build plate, as seen in the second picture. UPDATESomeone said that newer models have a Z height of 250mm instead of 245mm. So I have added a second model with a wider tip to account for this. 3D Print Settings Used:I printed this on an FDM printer using PLA.Layer Height: 0.2mmSupports: NoBuild Plate Adhesion: SkirtInfill: 20%
Category
3D Printer Accessories
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection