Glaceon under the Moon ( Hueforge )

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 165.39x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:     PLA PolyLite Black Transmission Distance: 0.3     PLA BambuLab Basic Blue Transmission Distance: 4     PLA BambuLab Basic Blue Gray Transmission Distance: 3     PLA BambuLab Matte Ice Blue Transmission Distance: 3.5     PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions:     Start with Black     At layer #6 (0.56mm) swap to Blue     At layer #10 (0.88mm) swap to Blue Gray     At layer #12 (1.04mm) swap to Ice Blue     At layer #21 (1.76mm) swap to Jade White for the rest.