Thingiverse
Glasbed holder
von flexvalves
12
Downloads
7
Likes
0
Makes
Corner piece & Z-axis filler for a removable (glass) bed upgrade to the FFCP 2016.
The corner piece has a chamber to fit over the m3 nut so you don't have to remove it.
It also has a tab so it can slide over the heatbed to grab slightly undersized glass.
It was designed for 5mm thick glass.
I minimized the Z-axis filler in order not to loose to much of the Z height.
I suggest to use 3 or 4 of these corner pieces.
The corner piece has a chamber to fit over the m3 nut so you don't have to remove it.
It also has a tab so it can slide over the heatbed to grab slightly undersized glass.
It was designed for 5mm thick glass.
I minimized the Z-axis filler in order not to loose to much of the Z height.
I suggest to use 3 or 4 of these corner pieces.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!