Glass riser/lifter X1C/P1S

I present a set for lifting the upper window for Bambu Lab X1C, which includes:1. Limiter 1 - 1 pc.2. Limiter 2 - 1 pc.3. Base 4 - 1 pc.3. Holder 3 - 1 pc.4. Arm 2 - 1 pc.5. Pin - 2 pcs.In addition to the above-mentioned elements, the correct assembly kit requires four M3x8 screws.The limiters protect the glass from falling/slipping out of the printer body when lifting it. They must be screwed to the back of the device using the existing threaded holes, using M3x8 screws, two screws per stop. The assembly method is shown in the photo.You can also use a set without limiters, then the glass will rest only on the very edge of the printer.Place the handle for lifting the glass between the glass and the original handle on the glass, and secure the whole thing with the original screws that previously attached the glass handle (see photos). The handle has a "tooth" that protects it from falling out of