Glass Shelf Bracket

This is a shelf bracket for making glass shelves inside a window frame for plants or other things. its designed to take a 5 inch wide piece of glass and hold it firmly in place.

Things to Note:
1: when measuring the glass to be cut out for a shelf make it 1 inch shorter than the required length so that the glass will sit flush in the channel.
2: there are very slight indents in the design, those are there for glue so that you can make these shelves permanent. if you decide not to use glue they wont affect anything and can be ignored (they are .1mm deep)
3:the holes for mounting to the wall are countersunk and are 5mm in diameter. which should allow for most any drywall screw (or similar) to fit through the hole and hold this to the wall
4: the glass i chose to do this can be bought at most any local hardware store. i chose .092 inch thick glass and if you use the sake thickness the half inch end stop on the bracket should sit flush with the glass.