Thingiverse
glasses case
door hallo_ralph
356
Downloads
359
Likes
0
Makes
glasses case
a simple box to protect your glasses - for glasses up to 145mm wide.
it includes a template to apply a self-adhesive velvet on the inside down to the bottom. (center the velvet and start 2mm below the top edge then strip down)
the 2 parts are connected with a steel wire (e.g. a straight bent paper clip) Ø0.8x125mm.
PLEASE NOTE: to close the can, do not press at the height of the lock but a little next to it - otherwise the can can not be closed.
__________
update: lock on the lid was made more stable
https://youtu.be/VIVX8ub6lFo
a simple box to protect your glasses - for glasses up to 145mm wide.
it includes a template to apply a self-adhesive velvet on the inside down to the bottom. (center the velvet and start 2mm below the top edge then strip down)
the 2 parts are connected with a steel wire (e.g. a straight bent paper clip) Ø0.8x125mm.
PLEASE NOTE: to close the can, do not press at the height of the lock but a little next to it - otherwise the can can not be closed.
__________
update: lock on the lid was made more stable
https://youtu.be/VIVX8ub6lFo
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!